Summary
These error messages are generated through the Tape Library module and are generally errors passed to DPX from the robotic arm.
Details
These error messages are generated through the Tape Library module and are generally errors passed to DPX from the robotic arm.
Message Number | Name | Explanation | Action |
---|---|---|---|
7000 | This is a generic Tape Library error without additional information. This could signal a communication problem with your Tape Library. | ||
7001 | ERR_INVA_TRAN_ELEM_ADDR | Tape Library--invalid transport element address. | |
7002 | ERR_INVA_SRC_ELEM_ADDR | Tape Library--invalid source element address. | |
7003 | ERR_INVA_DEST_ELEM_ADDR | Tape Library--invalid destination element address. | |
7004 | ERR_INVA_ELEM_ADDR | Tape Library--invalid element address. | |
7005 | ERR_DEST_ELEM_OCCUPIED | Tape Library--destination element occupied. | |
7006 | ERR_SRC_ELEM_EMPTY | Tape Library--source element empty. | |
7007 | ERR_SRC_CART_CTS_INACCE | Tape Library--source cartridge is not accessible. | |
7008 | ERR_DEST_IS_CHM | Tape Library--destination element cannot be the transport element. | |
7009 | ERR_SRC_IS_CHM | Tape Library--source element cannot be the transport element. | |
7010 | ERR_CART_STUCK_CTS | Tape Library--cartridge is stuck in tape drive. | |
7011 | ERR_SRC_MAGA_NOT_INSTAL | Tape Library--source magazine is not installed. | |
7012 | ERR_DEST_MAGA_NOT_INSTAL | Tape Library--destination magazine is not installed. | |
7013 | ERR_SRC_CTS_NOT_INSTAL | Tape Library--source tape drive is not installed. | |
7014 | ERR_DEST_CTS_NOT_INSTAL | Tape Library--destination tape drive is not installed. | |
7015 | ERR_NO_SCANNER_INSTAL | Tape Library--no scanner is installed. | |
7016 | ERR_ACCESS_SER_P_MODE | Tape Library--operation mode is changed to serial mode. | |
7017 | ERR_ACCESS_LCD_I_MODE | Tape Library--operation mode is changed to LCD interface mode. | From the front panel of the Tape Library, set the arm to SCSI access mode for use with DPX. |
7018 | ERR_ACCESS_SEQ_I_MODE | Tape Library--operation mode is changed to sequential mode. | |
7019 | ERR_DOOR_OPEN_AND_CLOSE | Tape Library--inventory may change - Door is opened and closed. | |
7020 | ERR_DOOR_IS_OPEN | Tape Library--door is opened. | |
7021 | ERR_INVA_OP_CODE | Tape Library--invalid operation code. | |
7022 | ERR_INTRN_TARG_FAILURE | Tape Library--internal target failure. | |
7023 | ERR_LOGI_UNIT_NOT_SUPP | Tape Library--the selected logical unit is not supported. | |
7024 | ERR_NOT_READY_TAPE_LOAD | Tape Library--tape is loading. | |
7025 | ERR_NOT_READY_MED_ACCESS | Tape Library--media is accessing. | |
7026 | ERR_NOT_READY_TAPE_UNLD | Tape Library--tape is unloading. | |
7027 | ERR_TAPE_MAY_CHANGE | Tape Library--inventory may change - Tape may be changed. | |
7028 | ERR_NO_CART_IN_MAGAZINE | Tape Library--no cartridge is in magazine. | |
7029 | ERR_DEVICE_IS_RESET | Tape Library--device is reset. | |
7030 | ERR_INCOMPAT_MED_INSTAL | Tape Library--incompatible media installed. | |
7031 | ERR_UNKNOWN_MED_FORMAT | Tape Library--unknown media format. | |
7032 | ERR_INCOMPAT_MED_FORMAT | Tape Library--incompatible media format. | |
7033 | ERR_MED_FORMAT_CORRUPT | Tape Library--media format is corrupted. | |
7034 | ERR_MED_NOT_PRESENT | Tape Library--media is not presented. | |
7035 | ERR_LOGI_UNIT_NOT_SEL_CONF | Tape Library--logical unit has not self-configured yet. | |
7036 | ERR_CARTRIDGE_FAULT | Tape Library--something wrong with the cartridge. | |
7037 | ERR_MED_LD_EJ_FAILED | Tape Library--media loading/eject fails. | |
7038 | ERR_UNLOAD_FAILED | Tape Library--media unloading fails. | |
7039 | ERR_MED_RMV_PREVENTED | Tape Library--media removal is prevented/Door is locked. | |
7040 | ERR_DRIVE_REQ_CLEANING | Tape Library--tape drive requests cleaning. | |
7041 | ERR_SRC_DEST_IN_SAME_TYPE | Tape Library--source and destination element are in the same type. | |
7042 | ERR_CART_IN_EXP_DOOR | Tape Library--cartridge is in express/mail slot. | |
7043 | ERR_NO_TEMP_STORAGE | Tape Library--no temporary storage for media movement. | |
7044 | ERR_EXP_DOOR_IS_OPEN | Tape Library--express/mail slot door is opened. | |
7045 | ERR_CAROUSEL_NOT_PRESENT | Tape Library--carousel is not present. | |
7046 | ERR_COVER_IS_OPEN | Tape Library--top cover is open. | |
7047 | ERR_SRC_CTS_LATCHED | Tape Library--source cartridge is latched in tape drive. | |
7048 | ERR_CART_PLACEMENT_ERR | Tape Library--cartridge placement error. | |
7049 | ERR_EXP_DOOR_IS_CLOSED | Tape Library--inventory may change - Express door is opened and closed. | |
7050 | ERR_POWER_OFF_AND_ON | Tape Library--inventory may change - Power is turned off and on. | |
7051 | ERR_UNIT_OFF_LINE | Tape Library--the unit is offline. | |
7052 | ERR_IM_EXPORT_ACCESSED | Tape Library--inventory may change - Import/Export is performed. | |
7053 | ERR_CHANGER_NOT_READY | Tape Library--changer is not ready. | |
7054 | ERR_MAGAZINE_LOCK_OP | Tape Library--magazine is locked. | |
7055 | ERR_MAGAZINE_INSERTED | Tape Library--magazine is inserted. | |
7056 | ERR_CLEANING_COMPLETED | Tape Library--cleaning is completed. | |
7057 | ERR_NO_EMPTY_SLOT | Contact Catalogic Software Technical Support. | |
7080 | ERR_SA_SERIAL_PORT | Tape Library--diagnostic failure. | |
7081 | ERR_INVA_START_ELEM_ADDR | Tape Library--invalid starting element address. | |
7082 | ERR_INVA_INVERT_FIELD | Tape Library--invalid invert field. | |
7083 | ERR_INVA_ELEM_TYPE_CODE | Tape Library--invalid element type code. | |
7084 | ERR_INVA_DBD_FIELD | Tape Library--invalid DBD field. | |
7085 | ERR_INVA_PAGE_CODE | Tape Library--invalid page code. | |
7086 | ERR_INVA_EPVD_FIELD | Tape Library--invalid EPVD field. | |
7087 | ERR_INVA_3rdPTY_FIELD | Tape Library--invalid 3rd party field. | |
7088 | ERR_INVA_3rdPTY_DEVID_FIELD | Tape Library--invalid 3rd party device id field. | |
7089 | ERR_INVA_SEND_ACT_CODE | Tape Library--invalid action code. | |
7090 | ERR_INVA_PARA_LIST_LEN | Tape Library--invalid parameter list length. | |
7091 | ERR_INVA_ELEM_LIST_LEN | Tape Library--invalid element list length. | |
7092 | ERR_INVA_RESV_FIELD_IN_PARA | Tape Library--invalid reserve field in parameter. | |
7093 | ERR_RESV_FIELD_NOT_ZERO | Tape Library--reserve field is not zero. | |
7094 | ERR_SA_INITIATOR | Tape Library--SCSI Initiator error. | |
7095 | ERR_OVERLAPPED_CMD | Tape Library--overlapped command. | |
7096 | ERR_INVA_BITS_IDENTIFY_MESS | Tape Library--invalid bits of SCSI identify message. | |
7097 | ERR_MESSAGE_ERROR | Contact Catalogic Software Technical Support. | |
7098 | ERR_INVA_FIELD_IN_CDB | Tape Library--invalid field in SCSI C DB. | See if your cleaning slot address is out of bounds and check your Tape Library configuration with JItest. |
7099 | ERR_INVA_SENSE_LENGTH | Tape Library--invalid SCSI sense length. | |
7100 | ERR_SA_MAN_INTERVENT_REQ | Tape Library--manual Intervention request. | |
7101 | ERR_SA_FORMAT_IN_PROGRESS | Tape Library--format in progress. | |
7102 | ERR_SA_LU_COMM_FAILURE | Tape Library--logical unit communication failure. | |
7103 | ERR_SA_LU_COMM_TIMEOUT | Tape Library--logical unit communication timeout. | |
7104 | ERR_SA_LU_COMM_E_PARITY | Tape Library--logical unit communication parity error. | |
7105 | ERR_SA_PARAM_NOT_SUPPORT | Tape Library--parameter is not supported in this SCSI command. | |
7106 | ERR_SA_PARAM_VALUE_INVA | Tape Library--parameter value is invalid in this SCSI command. | |
7107 | ERR_SA_CLEAN_CART_INST | Tape Library--cleaning cartridge is installed. | |
7108 | ERR_SA_OPER_COND_CHANGE | Tape Library--operation condition is changed. | |
7109 | ERR_SA_OPER_DEFI_CHANGE | Tape Library--operation definition is changed. . | |
7110 | ERR_SA_INQU_DATA_CHANGE | Tape Library--inquiry data returned is changed. | |
7111 | ERR_SA_LUN_FAIL_SELCONF | Tape Library--logical unit self-configuration fails. | |
7112 | ERR_SA_STATE_CHANGE | Tape Library--operation state is changed. | |
7113 | ERR_SA_MEDIUM_REM_REQUEST | Tape Library--media removal request. | |
7114 | ERR_INVA_EEPOS_FIELD | Tape Library--invalid EEPOS Field. | |
7115 | ERR_SA_ALLOC_DATA_LENGTH | Tape Library--invalid allocated data length. | There has likely been a change to the Tape Library that has increased the data storage required by the device driver. |
7116 | ERR_SA_NO_REF_POINT_FOUND | Tape Library--no reference point found. | |
7117 | ERR_SA_MECHNICAL_POSITION | Tape Library--mechanical positioning error. | |
7118 | ERR_SA_INTER_CPU_COMM | Tape Library--changer internal CPU communication error. | |
7119 | ERR_SA_INVA_MOTION_CPU_CODE | Tape Library--invalid motion CPU code. | |
7120 | ERR_SA_PICKER_RESP_TIMEOUT | Tape Library--picker response timeout. | |
7121 | ERR_SA_INVALID_DRIVE | Tape Library--invalid tape drive. | |
7122 | ERR_SA_PICKER_COM_TIMEOUT | Tape Library--wrong return error value. | |
7123 | ERR_SA_DRIVE_READY_TIMEOUT | Tape Library--wrong return error value. | |
7124 | ERR_SA_CANNOT_CLOSE_DRV_DOOR | Contact Catalogic Software Technical Support. | |
7125 | ERR_SA_READ_LABEL_TIMEOUT | Contact Catalogic Software Technical Support. | |
7134 | ERR_SA_PARSE_SAMODSEN | Tape Library--parsing error in parse samodsen function. | |
7135 | ERR_SA_PARSE_SAMODSEN2 | Tape Library--parsing error in parse samodsen2 function. | |
7136 | ERR_SA_PARSE_SARDELST | Tape Library--parsing error in parse sardelst function. | |
7137 | ERR_SA_PARSE_SARVT | Tape Library--parsing error in parse sarvt function. | |
7144 | ERR_CMD_NOT_SUPPORT | Contact Catalogic Software Technical Support. | |
7145 | ERR_SA_RESERVE_CONFLICT | Tape Library--reserve conflict. | |
7146 | ERR_SA_UNKNOWN_SENSE | Tape Library--unknown SCSI sense. | |
7147 | ERR_SA_CHECK_COND_ARQ | Tape Library--check condition argument. | |
7148 | ERR_SA_UNKNOWN_STATUS | Tape Library--unknown status. | |
7149 | ERR_SA_REQUEST_SENSE | Tape Library--request sense has error. | |
7150 | ERR_SA_CMD_INCOMPLETE | Tape Library--SCSI command not completed. | |
7151 | ERR_SA_BUSY | Tape Library--changer is in busy state. | |
7152 | ERR_SA_CMD_TIMEOUT | Tape Library--SCSI command timeout. | |
7153 | ERR_SA_NOT_SUPPORT_DEVICE | Tape Library--this device is not supported. | |
7160 | ERR_SA_SCTL_INVALID_REQUEST | Tape Library (HP-UX controller)--wrong return error value. | |
7166 | ERR_SA_SCSI_BUS_FAULT | Tape Library (AIX controller)--status is SCSI BUS FAULT. | |
7167 | ERR_SA_NO_DEVICE_RESPONSE | Tape Library (AIX controller)--status is NO DEVICE RESPONSE. | |
7168 | ERR_SA_ADAPTER_HDW_FAILURE | Tape Library (AIX controller)--status is ADAPTER HDW FAILURE. | |
7169 | ERR_SA_ADAPTER_SFW_FAILURE | Tape Library (AIX controller)--status is ADAPTER SFW FAILURE. | |
7170 | ERR_SA_FUSE_OR_TERMINAL_PWR | Tape Library (AIX controller)--status is FUSE OR TERMINAL PWR. | |
7171 | ERR_SA_SCSI_BUS_RESET | Tape Library (AIX controller)--status is SCSI BUS RESET. | |
7172 | ERR_SA_HOST_IO_BUS_ERR | Tape Library (AIX controller)--status is HOST IO BUS ERROR. | |
7173 | ERR_SA_UNKNOWN_CARD_STATUS | Tape Library (AIX controller)--status is UNKNOWN CARD STATUS. | |
7174 | ERR_SA_COMMAND_TERMINATED | Tape Library (AIX controller)--status is COMMAND TERMINATED. | |
7175 | ERR_SA_QUEUE_FULL | Tape Library (AIX controller)--status is QUEUE FULL. | |
7176 | ERR_SA_TARGET_RESET | Tape Library (SunOS5 controller)--status is TARGET RESET. | |
7177 | ERR_SA_SCSI_ABORT | Tape Library (SunOS5 controller)--status is SCSI ABORT. | |
7181 | ERR_SA_DSRT_DEVSCSI | Tape Library (Digital UNIX controller)--status is DSRT DEVSCSI. | |
7182 | ERR_SA_DSRT_MULT | Tape Library (Digital UNIX controller)--status is DSRT MULT. | |
7183 | ERR_SA_DSRT_CANCEL | Tape Library (Digital UNIX controller)--status is DSRT CANCEL. | |
7184 | ERR_SA_DSRT_REVCODE | Tape Library (Digital UNIX controller)--status is DSRT REVCODE. | |
7185 | ERR_SA_DSRT_AGAIN | Tape Library (Digital UNIX controller)--status is DSRT AGAIN. | |
7186 | ERR_SA_DSRT_HOST | Tape Library (Digital UNIX controller)--status is DSRT HOST. | |
7187 | ERR_SA_DSRT_NOSEL | Tape Library (Digital UNIX controller)--status is DSRT NOSEL. | |
7188 | ERR_SA_DSRT_SHORT | Tape Library (Digital UNIX controller)--status is DSRT SHORT. | |
7189 | ERR_SA_DSRT_OK | Tape Library (Digital UNIX controller)--status is DSRT OK. | |
7190 | ERR_SA_DSRT_SENSE | Tape Library (Digital UNIX controller)--status is DSRT SENSE. | |
7191 | ERR_SA_DSRT_NOSENSE | Tape Library (Digital UNIX controller)--status is DSRT NOSENSE. | |
7192 | ERR_SA_DSRT_TIMEOUT | Tape Library (Digital UNIX controller)--status is DSRT TIMEOUT. | |
7193 | ERR_SA_DSRT_LONG | Tape Library (Digital UNIX controller)--status is DSRT LONG. | |
7194 | ERR_SA_DSRT_PROTO | Tape Library (Digital UNIX controller)--status is DSRT PROTO. | |
7195 | ERR_SA_DSRT_EBSY | Tape Library (Digital UNIX controller)--status is DSRT EBSY. | |
7196 | ERR_SA_DSRT_REJECT | Tape Library (Digital UNIX controller)--status is DSRT REJECT. | |
7197 | ERR_SA_DSRT_PARITY | Tape Library (Digital UNIX controller)--status is DSRT PARITY. | |
7198 | ERR_SA_DSRT_MEMORY | Tape Library (Digital UNIX controller)--status is DSRT MEMORY. | |
7199 | ERR_SA_DSRT_CMDO | Tape Library (Digital UNIX controller)--status is DSRT CMDO. | |
7200 | ERR_SA_DSRT_STAI | Tape Library (Digital UNIX controller)--status is DSRT STAI. | |
7201 | ERR_SA_DSRT_UNIMPL | Tape Library (Digital UNIX controller)--status is DSRT UNIMPL. | |
7208 | ERR_SA_SCSISTAT_CONDITION_MET | Tape Library (Windows NT controller)--status is SCSISTAT CONDITION MET. | |
7209 | ERR_SA_SCSISTAT_INTERMEDIATE | Tape Library (Windows NT controller)--status is SCSISTAT INTERMEDIATE. | |
7210 | ERR_SA_SCSISTAT_INTERMEDIATE_COND_MET | Tape Library (Windows NT controller)--status is SCSISTAT INTERMEDIATE COND MET. | |
7211 | ERR_SA_SCSISTAT_RESERVATION_CONFLICT | Tape Library (Windows NT controller)--status is SCSISTAT RESERVATION CONFLICT. | |
7212 | ERR_SA_SCSISTAT_COMMAND_TERMINATED | Tape Library (Windows NT controller)--status is SCSISTAT COMMAND TERMINATED. | |
7213 | ERR_SA_SCSISTAT_QUEUE_FULL | Tape Library (Windows NT controller)--status is SCSISTAT QUEUE FULL. | |
7220 | ERR_SA_CAM_REQ_INPROG | Contact Catalogic Software Technical Support. | |
7221 | ERR_SA_CAM_REQ_CMP | Tape Library (Digital Unix controller)--CCB request completed w/out error. | |
7222 | ERR_SA_CAM_REQ_ABORTED | Tape Library (Digital Unix controller)--CCB request aborted by the host. | |
7223 | ERR_SA_CAM_UA_ABORT | Tape Library (Digital Unix controller)--Unable to Abort CCB request. | |
7224 | ERR_SA_CAM_REQ_CMP_ERR | Tape Library (Digital Unix controller)--CCB request completed with an err. | |
7225 | ERR_SA_CAM_BUSY | Tape Library (Digital Unix controller)--CAM subsystem is busy. | |
7226 | ERR_SA_CAM_REQ_INVALID | Tape Library (Digital Unix controller)--CCB request is invalid. | |
7227 | ERR_SA_CAM_PATH_INVALID | Tape Library (Digital Unix controller)--Path ID supplied is invalid. | |
7228 | ERR_SA_CAM_DEV_NOT_THERE | Tape Library (Digital Unix controller)--SCSI device not installed/present. | |
7229 | ERR_SA_CAM_UA_TERMIO | Tape Library (Digital Unix controller)--Unable to Terminate I/O CCB req. | |
7230 | ERR_SA_CAM_SEL_TIMEOUT | Tape Library (Digital Unix controller)--Target selection timeout. | |
7231 | ERR_SA_CAM_CMD_TIMEOUT | Tape Library (Digital Unix controller)--Command timeout. | |
7232 | ERR_SA_CAM_MSG_REJECT_REC | Tape Library (Digital Unix controller)--Message reject received. | |
7233 | ERR_SA_CAM_SCSI_BUS_RESET | Tape Library (Digital Unix controller)--SCSI bus reset sent/received. | |
7234 | ERR_SA_CAM_UNCOR_PARITY | Tape Library (Digital Unix controller)--Uncorrectable parity error occurred. | |
7235 | ERR_SA_CAM_AUTOSENSE_FAIL | Tape Library (Digital Unix controller)--Autosense: Request sense cmd fail. | |
7236 | ERR_SA_CAM_NO_HBA | Tape Library (Digital Unix controller)--No HBA detected error. | |
7237 | ERR_SA_CAM_DATA_RUN_ERR | Tape Library (Digital Unix controller)--Data overrun/underrun error. | |
7238 | ERR_SA_CAM_UNEXP_BUSFREE | Tape Library (Digital Unix controller)--Unexpected BUS free. | |
7239 | ERR_SA_CAM_SEQUENCE_FAIL | Tape Library (Digital Unix controller)--Target bus phase sequence failure. | |
7240 | ERR_SA_CAM_CCB_LEN_ERR | Tape Library (Digital Unix controller)--CCB length supplied is inadequate. | |
7241 | ERR_SA_CAM_PROVIDE_FAIL | Tape Library (Digital Unix controller)--Unable to provide req.capability. | |
7242 | ERR_SA_CAM_BDR_SENT | Tape Library (Digital Unix controller)--A SCSI BDR msg was sent to target. | |
7243 | ERR_SA_CAM_REQ_TERMIO | Tape Library (Digital Unix controller)--CCB request terminated by host. | |
7244 | ERR_SA_CAM_HBA_ERR | Tape Library (Digital Unix controller)--Unrecoverable host adaptor error. | |
7245 | ERR_SA_CAM_BUS_RESET_DENIED | Tape Library (Digital Unix controller)--SCSI bus reset denied. | |
7246 | ERR_SA_CAM_IDE | Tape Library (Digital Unix controller)--Initiator Detected Error Received. | |
7247 | ERR_SA_CAM_RESRC_UNAVAIL | Tape Library (Digital Unix controller)--Resource unavailable. | |
7248 | ERR_SA_CAM_UNACKED_EVENT | Tape Library (Digital Unix controller)--Unacknowledged event by host. | |
7249 | ERR_SA_CAM_MESSAGE_RECV | Tape Library (Digital Unix controller)--Msg received in Host Target Mode. | |
7250 | ERR_SA_CAM_INVALID_CDB | Tape Library (Digital Unix controller)--Invalid C DB received in HT Mode. | |
7251 | ERR_SA_CAM_LUN_INVALID | Tape Library (Digital Unix controller)--LUN supplied is invalid. | |
7252 | ERR_SA_CAM_TID_INVALID | Tape Library (Digital Unix controller)--Target ID supplied is invalid. | |
7253 | ERR_SA_CAM_FUNC_NOTAVAIL | Tape Library (Digital Unix controller)--The requested function is not available. | |
7254 | ERR_SA_CAM_NO_NEXUS | Tape Library (Digital Unix controller)--Nexus is not established. | |
7255 | ERR_SA_CAM_IID_INVALID | Tape Library (Digital Unix controller)--The initiator ID is invalid. | |
7256 | ERR_SA_CAM_CDB_RECVD | Tape Library (Digital Unix controller)--The SCSI C DB has been received. | |
7257 | ERR_SA_CAM_LUN_ALLREADY_ENAB | Tape Library (Digital Unix controller)--LUN already enabled. | |
7258 | ERR_SA_CAM_SCSI_BUSY | Tape Library (Digital Unix controller)--SCSI bus busy. | |
7259 | ERR_SA_CAM_SIM_QFRZN | Tape Library (Digital Unix controller)--The SIM queue is frozen with an error. | |
7260 | ERR_SA_NO_SENSE_DATA | Tape Library (Digital Unix controller)--CCB request is in progress. | |
7261 | ERR_SA_ERR_JBDP_GET | Contact Catalogic Software Technical Support. | |
7262 | ERR_SA_NDMP_IOCTL_ERROR | Contact Catalogic Software Technical Support. | |
7263 | ERR_SA_NDMP_REOPEN | Contact Catalogic Software Technical Support. | |
7264 | ERR_SA_CONN_DESC_GET | Contact Catalogic Software Technical Support. | |
7265 | ERR_SA_CREATE_MESSAGE | Contact Catalogic Software Technical Support. | |
7266 | ERR_SA_PARSE_MESSAGE | Contact Catalogic Software Technical Support. | |
7267 | ERR_SA_SEND_MESSAGE | Contact Catalogic Software Technical Support. | |
7268 | ERR_SA_RECV_MESSAGE | Contact Catalogic Software Technical Support. | |
7269 | ERR_SA_CM_READY | Contact Catalogic Software Technical Support. | |
7270 | ERR_SA_NDMP_MSG_HANDLER | Contact Catalogic Software Technical Support. | |
7271 | ERR_SA_TOK_GETKEYWORD | Contact Catalogic Software Technical Support. | |
7272 | ERR_SA_NDMPC | Contact Catalogic Software Technical Support. | |
7273 | ERR_SA_CONN_DESC_FREE | Contact Catalogic Software Technical Support. | |
7274 | ERR_EMPTY_DATA_BUFFER | Contact Catalogic Software Technical Support. | |
7275 | ERR_PARSE_SA_CAP1 | Contact Catalogic Software Technical Support. | |
7276 | ERR_SA_REQID | Contact Catalogic Software Technical Support. | |
7277 | ERR_SA_UNEXPECTED_MSG | Contact Catalogic Software Technical Support. . | |
7448 | ERR_KEY_NO_SENSE | Tape Library (sense key message)--no data. | |
7449 | ERR_KEY_RECOVERED_ERROR | Tape Library (sense key message)--Recovered error. | |
7450 | ERR_KEY_NOT_READY | Tape Library (sense key message)--Not ready. | |
7451 | ERR_KEY_MEDIUM_ERROR | Tape Library (sense key message)--Medium error. | |
7452 | ERR_KEY_HARDWARE_ERROR | Tape Library (sense key message)--Hardware error. | |
7453 | ERR_KEY_ILLEGAL_REQUEST | Tape Library (sense key message)--Illegal request. | |
7454 | ERR_KEY_UNIT_ATTENTION | Tape Library (sense key message)--Unit attention. | |
7455 | ERR_KEY_DATA_PROTECT | Tape Library (sense key message)--Data protect. | |
7456 | ERR_KEY_BLANK_CHECK | Tape Library (sense key message)--Blank Check. | |
7457 | ERR_KEY_VENDOR_SPECIFIC | Tape Library (sense key message)--Vendor unique. | |
7458 | ERR_KEY_COPY_ABORT | Tape Library (sense key message)--Copy abort. | |
7459 | ERR_KEY_ABORT_COMMAND | Tape Library (sense key message)--Abort command. | |
7460 | ERR_KEY_EQUAL | Tape Library (sense key message)--Equal. | |
7461 | ERR_KEY_VOLUME_OVERFLOW | Tape Library (sense key message)--Volume overflow. | |
7462 | ERR_KEY_MISCOMPARE | Tape Library (sense key message)--Miscompare. | |
7470 | ERR_UNCLASSIFY_CODE_ERROR | Tape Library--Unclassified error. | |
7471 | ERR_OS_DEPENDENT | Tape Library--Changer driver error status is operating system dependent. | |
7472 | ERR_UNCLASSIFY_STATUS | Tape Library--Unclassified status. | |
7473 | ERR_ERROR_RETURN_VALUE | Tape Library--Wrong return error value. | This is a general Tape Library hardware error. There should be more information, including sense key codes, in the juker logs (ssjuker.*) on the machine controlling the robotic arm. Contact the hardware manufacturer with any sense key and additional sense key codes found, e.g. SENSE_KEY=4, ACS=85AC SQ=21. |
7496 | ERR_READY_INPORT_TIMEOUT | Contact Catalogic Software Technical Support. | |
7497 | ERR_TAPE_IN_DRIVE | Contact Catalogic Software Technical Support. | |
7498 | ERR_TAPE_INSIDE_DRIVE | Tape Library--The drive is occupied. | |
7499 | ERR_RESTORE_MOUNT_FAIL | Contact Catalogic Software Technical Support. | |
7500 | ERR_JUKER_CONNECTION_NOT_FOUND | Contact Catalogic Software Technical Support. | |
7600 | ERR_ACSLS_STATUS_BASE | Contact Catalogic Software Technical Support. | |
7800 | ERR_MTCC_BASE | Contact Catalogic Software Technical Support. | |
7850 | ERR_AML_BASE | Contact Catalogic Software Technical Support. | |
7949 | ERR_INVALID_DRIVE_RANGE | Contact Catalogic Software Technical Support. | |
7950 | ERR_TLIB_DRIVE_NOT_ALLOCATED | Contact Catalogic Software Technical Support. | |
7951 | ERR_NOT_IN_SCRATCH_POOL_RANGE | Contact Catalogic Software Technical Support. | |
7952 | ERR_INVALID_SCRATCH_POOL | Contact Catalogic Software Technical Support. | |
7953 | ERR_LGJB_TYPE_NOTMATCH | Contact Catalogic Software Technical Support. | |
7954 | ERR_REACH_LGJB_MAX_LIMIT | Contact Catalogic Software Technical Support. | |
7955 | ERR_PARSING_DAS_CONF_FILE | Contact Catalogic Software Technical Support. | |
7956 | ERR_MSG_ARG_NULL | Contact Catalogic Software Technical Support. | |
7957 | ERR_INVALID_VOLSER_RANGE | Contact Catalogic Software Technical Support. | |
7958 | ERR_CLIENT_NOT_EXIST | Contact Catalogic Software Technical Support. | |
7959 | ERR_PARSING_CLIENT_FILE | Contact Catalogic Software Technical Support. | |
7960 | ERR_UPDATE_CLIENT_FILE | Contact Catalogic Software Technical Support. | |
7961 | ERR_INVALID_SCRATCH_VOLSER | Contact Catalogic Software Technical Support. | |
7962 | ERR_DRIVE_NOT_FOUND | Contact Catalogic Software Technical Support. | |
7963 | ERR_INCREMENT_RANGE | Contact Catalogic Software Technical Support. | |
7964 | ERR_ALLOCATE_VOLSERS | Contact Catalogic Software Technical Support. | |
7965 | ERR_JB_SEND_ERROR | Contact Catalogic Software Technical Support. | |
7966 | ERR_JB_RECV_ERROR | Contact Catalogic Software Technical Support. | |
7967 | ERR_INVALID_DRIVE_LEN | Contact Catalogic Software Technical Support. | |
7968 | ERR_INVALID_VOLSER_LEN | Contact Catalogic Software Technical Support. | |
7969 | ERR_OPEN_JB_FILE | Contact Catalogic Software Technical Support. | |
7970 | ERR_OPEN_DAS_CONF_FILE | Contact Catalogic Software Technical Support. | |
7971 | ERR_JB_SET_CLIENT_ENV | Contact Catalogic Software Technical Support. | |
7972 | ERR_PARSING_DRIVE_ENTRY | Contact Catalogic Software Technical Support. | |
8000 | ERR_RTM_JH_CONNECTION_FAIL | Contact Catalogic Software Technical Support. | |
8001 | ERR_SCH_ESE_CONNECTION_FAIL | Contact Catalogic Software Technical Support. |