Summary
CMAgent Messages
Details
| Message Number | Name | Explanation | Action |
|---|---|---|---|
| 10000 | CM_ERR_BASE | Contact Catalogic Software Technical Support. | |
| 10001 | CM_ERR_EPERM | The operation failed because permission was denied. | |
| 10002 | CM_ERR_ENOENT | Contact Catalogic Software Technical Support. | |
| 10003 | CM_ERR_ESRCH | Contact Catalogic Software Technical Support. | |
| 10004 | CM_ERR_EINTR | The system generated an interrupt signal. | |
| 10005 | CM_ERR_EIO | The cmagent encountered an I/O error on send or receive. | |
| 10009 | CM_ERR_EBADF | Contact Catalogic Software Technical Support. | |
| 10010 | CM_ERR_ECHILD | The cmagent detected an error on one of its child processes. | |
| 10012 | CM_ERR_ENOMEM | A memory allocation operation failed. | |
| 10013 | CM_ERR_EACCES | Contact Catalogic Software Technical Support. . | |
| 10014 | CM_ERR_EFAULT | Contact Catalogic Software Technical Support. | |
| 10022 | CM_ERR_EINVAL | This is a generic error code set by the cmagent. | Try binding communication to a specific IP address with the SSICMAPI hostname option, e.g. -hn xxx.xxx.xxx.xxx. Restart DPX after applying this flag. |
| 10024 | CM_ERR_EMFILE | There was an error allocating the socket or pipe. | |
| 10032 | CM_ERR_EPIPE | A communication pipe or socket was broken. | Try modifying the SSICMAPI settings to avoid using local pipes, i.e. -lcl no, on the machines that are involved in the pipe errors. |
| 10035 | CM_ERR_EWOULDBLOCK | The operation would set the socket into blocking mode. | |
| 10036 | CM_ERR_EINPROGRESS | The last cmagent operation has not yet completed. | |
| 10037 | CM_ERR_EALREADY | The requested operation has already been carried out. | |
| 10038 | CM_ERR_ENOTSOCK | The operation cannot be completed because the socket is nonexistent. | |
| 10039 | CM_ERR_EDESTADDRREQ | Contact Catalogic Software Technical Support. | |
| 10040 | CM_ERR_EMSGSIZE | Contact Catalogic Software Technical Support. | |
| 10041 | CM_ERR_EPROTOTYPE | Contact Catalogic Software Technical Support. | |
| 10042 | CM_ERR_ENOPROTOOPT | Contact Catalogic Software Technical Support. | |
| 10043 | CM_ERR_EPROTONOSUPPORT | Contact Catalogic Software Technical Support. | |
| 10044 | CM_ERR_ESOCKTNOSUPPORT | Contact Catalogic Software Technical Support. | |
| 10045 | CM_ERR_EOPNOTSUPP | Contact Catalogic Software Technical Support. | |
| 10046 | CM_ERR_EPFNOSUPPORT | Contact Catalogic Software Technical Support. | |
| 10047 | CM_ERR_EAFNOSUPPORT | Contact Catalogic Software Technical Support. | |
| 10048 | CM_ERR_EADDRINUSE | Contact Catalogic Software Technical Support. | |
| 10049 | CM_ERR_EADDRNOTAVAIL | Contact Catalogic Software Technical Support. | |
| 10050 | CM_ERR_ENETDOWN | The connection has been shut down to a module. | |
| 10051 | CM_ERR_ENETUNREACH | Communication with the desired module cannot be established. | |
| 10052 | CM_ERR_ENETRESET | Contact Catalogic Software Technical Support. | |
| 10053 | CM_ERR_ECONNABORTED | Contact Catalogic Software Technical Support. | |
| 10054 | CM_ERR_ECONNRESET | The connection to the module has been reset. | |
| 10055 | CM_ERR_ENOBUFS | An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full. | If this is Windows, it is possible that the TCPIP queue is full, check the system logs for error messages. Reinstall TCP/IP and the latest service packs. |
| 10056 | CM_ERR_EISCONN | Contact Catalogic Software Technical Support. | |
| 10057 | CM_ERR_ENOTCONN | Contact Catalogic Software Technical Support. | |
| 10058 | CM_ERR_ESHUTDOWN | Contact Catalogic Software Technical Support. | |
| 10059 | CM_ERR_ETOOMANYREFS | Contact Catalogic Software Technical Support. | |
| 10060 | CM_ERR_ETIMEDOUT | An event timeout limit was reached. | Related Article: Backup fails with error rc (10060), description (An event timeout limit was reached.)) |
| 10061 | CM_ERR_ECONNREFUSED | The GUI could not connect to the CMAGENT on the server that was specified. | (1) Correct the hostname or IP address given for the server, if incorrect. (2) Verify that the CMAGENT on the server is running. (3) Supply the argument -hn (and -sbs 65535 for Windows operating systems) to the SSICMAPI variable. Related Article: Backup fails with error rc (10060), description (An event timeout limit was reached.)) |
| 10062 | CM_ERR_ELOOP | Contact Catalogic Software Technical Support. | |
| 10063 | CM_ERR_ENAMETOOLONG | Contact Catalogic Software Technical Support. | |
| 10064 | CM_ERR_EHOSTDOWN | Contact Catalogic Software Technical Support. | |
| 10065 | CM_ERR_EHOSTUNREACH | Contact Catalogic Software Technical Support. | |
| 10066 | CM_ERR_ENOTEMPTY | Contact Catalogic Software Technical Support. | |
| 10067 | CM_ERR_EPROCLIM | Contact Catalogic Software Technical Support. | |
| 10068 | CM_ERR_EUSERS | Contact Catalogic Software Technical Support. | |
| 10069 | CM_ERR_EDQUOT | Contact Catalogic Software Technical Support. | |
| 10070 | CM_ERR_ESTALE | Contact Catalogic Software Technical Support. | |
| 10071 | CM_ERR_EREMOTE | Contact Catalogic Software Technical Support. | |
| 10077 | CM_ERR_EASYNCNOTSUPP | Contact Catalogic Software Technical Support. | |
| 10078 | CM_ERR_ESYNCNOTSUPP | Contact Catalogic Software Technical Support. | |
| 10079 | CM_ERR_ENO_RCB | Contact Catalogic Software Technical Support. | |
| 10091 | CM_ERR_SYSNOTREADY | Contact Catalogic Software Technical Support. | |
| 10092 | CM_ERR_VERNOTSUPPORTED | Contact Catalogic Software Technical Support. | |
| 10093 | CM_ERR_NOTINITIALISED | The API has not been initialized. | |
| 11001 | CM_ERR_HOST_NOT_FOUND | Error return codes from gethostbyname() and gethostbyaddr(). Authoritative Answer:Host not found. | This is a common hostname resolution problem. Make sure that clients<->master server can communicate via hostname and that clients<->device servers can communicate via hostname. Check forfully qualified vs. short name issues. |
| 11002 | CM_ERR_TRY_AGAIN | Error return codes from gethostbyname() and gethostbyaddr(). Non-Authoritative: Host not found, or SERVERFAIL. . | |
| 11003 | CM_ERR_NO_RECOVERY | Error return codes from gethostbyname() and gethostbyaddr(). Non recoverable errors, FORMERR, REFUSED, NOTIMP. | |
| 11004 | CM_ERR_NO_DATA | When the GUI connected to the CMAGENT on the server that was specified, the data manager returned no data of the requested type. | (1) Correct the hostname or IP address given for the server, if incorrect. (2) Update the server's DNS database, if applicable. (3) Supply the argument -hn to the SSICMAPI variable. |
| 12001 | CM_ERR_INITTED | CMAGENT has already been initialized. | |
| 12002 | CM_ERR_MODNAME | Bad module name passed to connect or register. | |
| 12003 | CM_ERR_MSGTRUNC | The message size exceeds the received buffer size used in cm recv rec and has been truncated. | |
| 12004 | CM_ERR_READZERO | Due to a shutdown of the remote module, a zero-length data read resulted in routine cmrecv rec. | |
| 12005 | CM_ERR_RDY_ERROR | cm ready return error reported at ret sock err. | |
| 12006 | CM_ERR_RDY_READ | cm ready read event error reported on routine ret sock err. | |
| 12007 | CM_ERR_RDY_ACCEPT | cm ready accept event error reported on routine ret sock err. | |
| 12008 | CM_ERR_DLL_TABOVFL | The Dynamic Link Library task to ctx mapping table is full. | |
| 12009 | CM_ERR_DLL_APIVER | The version of the CMAGENT API is incorrect for this version of Dynamic Link Library. | |
| 12010 | CM_ERR_TERM_REENT | The CMAGENT API was re-entered to do a call to cm term. | |
| 12011 | CM_ERR_RDY_WT_CONN | Message returned by a cm ready write or connect event, reported on ret sock err. | |
| 12012 | CM_ERR_SOFT_BUSY | The socket is busy carrying out the previous operation. | |
| 12013 | CM_ERR_READ_HDR_BAD | An invalid header length was specified on read or invalid header status bits were set. | |
| 12014 | CM_ERR_NULL_ARG | Message returned when performing validity check found one or more pointer arguments with NULL value. | |
| 12015 | CM_ERR_LEN_ZERO_NEG | Message returned when performing validity check found one or more length args with 0 or negative value. | |
| 12016 | CM_ERR_LEN_WRITE_BIG | Message returned when performing validity check found one or more arguments of length greater than or equal to CM MAX MSG LEN. | |
| 12017 | CM_ERR_RDY_READ_DGRAM | Message returned from a cm ready data gram event, reported on ret sock err. . | |
| 12018 | CM_ERR_STR_TRUNC | The size of area for dotted IP address exceeded CM MAX ADDR SIZE. | |
| 12019 | CM_ERR_READBUF_NOT_EMPTY | An attempt was made to read a new group of msgs when read buffer was not yet empty. | |
| 12020 | CM_ERR_READBUF_NOT_ENOUGH | A request for more data than is contained in a (non-empty) read buffer was made. | |
| 12021 | CM_ERR_SVR_BAD_REPLY | A bad reply on LOCAL CLI request was returned. | This message may occur with NDMP filers that do not meet the minimum requirements of NDMP V3 capability. |
| 12022 | CM_ERR_SVR_BAD_OPTION | A bad option on LOCAL SVR reply was returned. | |
| 12023 | CM_ERR_NOT_VALID_LOCAL | A request for local socket was found to be invalid. | |
| 12024 | CM_ERR_LOCAL_LOGIC | An internal error was encountered, in which a local routine was called and no local transport implemented. | |
| 12025 | CM_ERR_CLI_BAD_REQUEST | Issuance of a bad connect request. | |
| 12026 | CM_ERR_CLI_BAD_OPTION | A bad option was specified on LOCAL CLI request. | |
| 12027 | CM_ERR_REG_RDY_SCLI | Contact Catalogic Software Technical Support. | |
| 12028 | CM_ERR_SEL_EVT_LOGIC | Contact Catalogic Software Technical Support. | |
| 12029 | CM_ERR_NO_LISTEN | Contact Catalogic Software Technical Support. | |
| 12032 | CM_ERR_SR_TIMEOUT | Contact Catalogic Software Technical Support. | |
| 12033 | CM_ERR_RDY_BREAK | Contact Catalogic Software Technical Support. | |
| 12101 | CM_ERR_AG_WAIT_LIMIT | The wait table overflowed due to too many waiting/unsatisfied start requests. | |
| 12102 | CM_ERR_AG_REUSE_LIMIT | More than MAX REUSE ENT different reusable servers were requested. | |
| 12103 | CM_ERR_AG_BAD_REPLY | CMAGENT received an unexpected reply from agent, in routine cm_ap_connect. | |
| 12104 | CM_ERR_AG_REG_TIMEOUT | The CMAGENT on the node did not respond within the timeout setting. | |
| 12105 | CM_ERR_AG_REG_SHUTDOWN | A request was received from an agent to shut down all servers, in routine cm_ap_connect. | |
| 12106 | CM_ERR_AG_CMD_PARSE | Contact Catalogic Software Technical Support. | |
| 12107 | CM_ERR_AG_MOD_NOT_FOUND | Contact Catalogic Software Technical Support. |